CNC Turning na Milling Center TTY Series
Nhazi ngwaahịa
Atụmatụ
Nkwụsi ike dị elu, mbelata dị arọ, na nkwụsi ike dị elu: Ọ na-anakwere ihe nkedo nwere ihe nkedo, nhazi akwa akwa 30º yana atụmatụ ọgịrịga siri ike iji belata mgbagha na nrụrụ ọkụ.
Nzaghachi dị elu na nke dị elu: A na-eji blọlụ dị elu mee ihe n'ihu na azụ iji nweta nkwụsi ike dị elu na ntụgharị ntụgharị dị elu..
Tọ spindle servo unit nwere elu nkenke na dị mfe ịnọgide na-enwe.
Ịrụ ọrụ dị elu: Oke spindle ọsọ bụ 4500rpm / min, na mmegharị ngwa ngwa nwere ike iru 30m / min.
Nkọwa nka nka
| Nkọwa nka nka | ||
| Ihe | Nkọwapụta | |
| Akwa | A na-eji ihe nkedo dị elu mee ihe ndina na isi ala, na ihe ndina na-adaba na 30º. | |
| Oke nhazi | Dayameta ntụgharị kachasị elu nke akwa | 600mm |
| Dayameta nhazi kacha elu nke diski | 300mm | |
| Dayameta nhazi kacha elu nke pallet | 300mm | |
| Ogologo nhazi kacha elu nke mmanya | 500mm | |
| Dayameta oghere mmanya kacha | Φ51mm | |
| Nri njem | X-axis kacha njem | 300mm |
| Z-axis kacha njem | 590 mm | |
| Y-axis kacha njem | ± 50mm (Interpolation) | |
| Ọnụego mmegharị ngwa ngwa X/Z/Y axis | 30m/min | |
| X/Z/Y skru dayameta/pitch | 32/10mm | |
| Obosara ndu ndu ahịrị X/Z/Y | 35mm | |
| X-axis servo moto | β12 (ya na breeki) | |
| Z-axis servo moto | β12 | |
| Y-axis servo moto | β12 (ya na breeki) | |
| Servo turret moto | 3N.m | |
| Ike isi moto | β12 | |
| Nkenkenke | Ndokwasa axis X/Z ziri ezi | ± 0.003mm |
| Axis X/Z kwugharịa izi ezi | ± 0.003mm | |
| Ịkwaga ọdụ ọdụ | Oghere/ dayameta nke aka aka nke Tailstock | Mohs #5 |
| Ọdụdọ na-akpụ akpụ njem | 80-630mm | |
| Oke nrụgide ọdụdụ | 5-30Kg/cm2 | |
| Usoro mbugharị azụ azụ | Mmegharị hydraulic mmemme | |
| Spindle | Ụdị imi spindle | A2-6 |
| Spindle site na oghere dayameta | Φ66mm | |
| Spindle kacha ọsọ | 4500 rpm | |
| Spindle moto ike | 11KW | |
| Chuck/ rotary cylinder | 8 sentimita asatọ | |
| Turret | Servo kwadoro turret | BMT55/12 ọdụ ụgbọ |
| Nha isi isi | 330 | |
| Nkọwa njide ngwaọrụ | □ 25×25 | |
| Ihe njide ngwá ọrụ na-agwụ ike | Φ32mm | |
| 0° isi igwe igwe ihe (1 ibe) | ER32/3000 rpm | |
| Isi ihe igwe nri akụkụ 90° (1 ibe) | ER32/3000 rpm | |
| Ndị ọzọ | Mkpokọta ike | 26KW |
| Ngwá ọrụ igwe net arọ | Ihe dịka 4700kg | |
| Ogo igwe (ogologo * obosara * ịdị elu) | 3050×2000×2050mm | |
Atụmatụ nhazi
Spindle
Na-akwado oke-nkenke na ịcha ọrụ dị arọ iji mụbaa arụpụtaghị ihe.
Turret
Na-eme ka ntụkwasị obi indexing dịkwuo mma ma jide n'aka nnukwu isi ike.
Sistemu
Ọkọlọtọ FANUC F Oi-TF Plus CNC Sistemụ, arụmọrụ nhazi dị elu oke ọrụ, elu mfe nke ojiji.
Ịkwụsị Elu
Ihe nkedo dị arọIron Base And components, Strong ujo absorption na nkwụsi ike dị elu.
Mgbagha bọọlụ
Mkpọsa pretensioning, azụ azụ na okpomọkụ ebili elongation ewepụrụ tupu.
Ntuziaka Linear Roller
Mkpụcha arc, ịkpụ bevel na udidi elu otu. Ntugharị ọsọ ọsọ zuru ụwa ọnụ.
