Usoro gantry machining center PM-U nke nwere axis ise
Atụmatụ
Usoro a nke ngwaahịa bụ a onwe-mepụtara ofu doo ise-axis gantry machining center na kọmpat Ọdịdị, magburu onwe arụmọrụ, elu na-agba, elu nkenke, elu rigidity, wdg Ọ bụ adabara machining akụkụ na a dịgasị iche iche nke ụlọ ọrụ dị ka aerospace, injinia igwe, ụgbọ okporo ígwè, nkenke ebu, ifufe ike, wdg.
Usoro PM-U
Ọ na-anakwere isi na-agba ọsọ na elu-nkenke A / C okpukpu abụọ ma bụrụ nke ejiri eriri ọkụ eletrik dị elu na nke dị elu, nke nwere ikike igbutu siri ike.
A/C isi na-efegharị ugboro abụọ
Ọ na-anakwere isi mgbagharị abụọ dị elu dị elu, nke dị elu ma kwadebere ya na spindle eletrik na-agba ọsọ dị elu, na-ezute ihe ndị dị elu chọrọ maka nzizi akụrụngwa, ịdị mma elu na nhazi nhazi.
Ọdịdị siri ike dị elu kachasị mma
A na-eji ụzọ imewe emecha emecha mee nyocha static na modal nke akụkụ dị iche iche nkeigweiji kwalite n'ihu n'usoro ngwaahịa ma nweta nhazi nhazi dị elu na nke dị arọ.
Ịkpọsa ụkpụrụ nkwado inyeaka
Ogologo -njemA na-eji ihe nkwado na-ese n'elu mmiri, nke nwere ike imeziwanye oke ọsọ nke ịghasa ndu na nkwụsi ike nke ntụgharị ọsọ dị elu.
Magazin ngwaọrụ
Ụdị akwụkwọ akụkọ ngwá ọrụ dị iche iche, 24/32/40/60, dị iji belata oge nhazi inyeaka nke ọma.
Nkwado siri ike dị elu
NkeigweAkwadoro ihe ndina nwere ntuziaka nnukwu nha atọ, nke na-enye nkwado siri ike na njide ziri ezi.
Nhazi nchekwa nke mmadụ
The mpempe akwụkwọ metal labyrinth imewe na ala nkeworktablena-egbochi ibe ígwè ịbanye naigweakwa. Mwepụ mgbawa agbakwunyere na-ewepụsị nsogbu nke ntapu mmiri.
Nkọwa nka nka
| Ihe | Nkeji | RFPM3028U | RFPM4028U | RFPM6028U | RFPM4033U |
| Oke nhazi |
|
|
|
|
|
| njem axis X/Y/Z | mm | 3200/3200/1000 | 4200/3200/1000 | 6200/3200/1000 | 4200/3700/1000 |
| A/C ntụgharị ntụgharị axis | ° | ±105/±360 | ±105/±360 | ±105/±360 | ±105/±360 |
| Gantry dị irè obosara | mm | 2800 | 2800 | 2800 | 3300 |
| Ebe dị anya site na imi spindle ruo worktable | mm | 200-1200 | 200-1200 | 200-1200 | 200-1200 |
| Tebụl arụ ọrụ |
|
|
|
|
|
| Akụkụ arụ ọrụ | mm | 2000×3000 | 2000×4000 | 2000×6000 | 2500×4000 |
| Ikike ibu ibu arụ ọrụ | t | 16 | 20 | 26 | 22 |
| Nkọwapụta T-oghere | mm | 28 | 28 | 28 | 28 |
| Nri ịkwọ ụgbọala |
|
|
|
|
|
| Oke. ọsọ nri X/Y/Z | m/min | 12/12/12 | 12/12/12 | 12/12/12 | 10/10/10 |
| Oke. ọsọ nri A/C | rpm | 60 | 60 | 60 | 60 |
| Ọsọ ọsọ ọsọ X/Y/Z | m/min | 20/20/15 | 20/20/15 | 15/20/15 | 15/15/15 |
| Ọsọ ọsọ ọsọ A/C | rpm | 100 | 100 | 100 | 100 |
| Spindle |
|
|
|
|
|
| Ụzọ ịkwọ ụgbọala |
| Igwe ọkụ eletrik | Igwe ọkụ eletrik | Igwe ọkụ eletrik | Igwe ọkụ eletrik |
| Oke. spindle ọsọ | rpm | 7000 | 7000 | 7000 | 7000 |
| Ike Spindle (S1/S6) | Kw | 50/60 | 50/60 | 50/60 | 50/60 |
| Ọkpụkpụ Spindle (S1/S6) | Nm | 318/382 | 318/382 | 318/382 | 318/382 |
| Spindle taper |
| HSK-A100 | HSK-A100 | HSK-A100 | HSK-A100 |
| Magazin ngwaọrụ (nhọrọ) |
|
|
|
|
|
| Ikike magazin ngwá ọrụ | T | 24 | 24 | 24 | 24 |
| Ụdị njide ngwaọrụ |
| HSK-A100 | HSK-A100 | HSK-A100 | HSK-A100 |
| Oke. dayameta ngwá ọrụ | mm | ф110/ф200 | ф110/ф200 | ф110/ф200 | ф110/ф200 |
| Oke. ogologo ngwá ọrụ | mm | 350 | 350 | 350 | 350 |
| Oke. arọ ngwá ọrụ | kg | 20 | 20 | 20 | 20 |
| izi ezi |
|
|
|
|
|
| Ndokwa ziri ezi X/Y/Z | mm | 0.018/0.018/0.014 | 0.020/0.018/0.014 | 0.028/0.018/0.014 | 0.020/0.018/0.014 |
| Nkwagharị X/Y/Z | mm | 0.012/0.012/0.010 | 0.012/0.012/0.010 | 0.018/0.012/0.010 | 0.012/0.012/0.010 |
| Ndị ọzọ |
|
|
|
|
|
| Ibu igwe | t | 57 | 63 | 75 | 70 |
| Akụkụ igwe (L× W × H) | cm | 910×670×650 | 1110×670×650 | 1510×670×650 | 1110×720×650 |
| Ihe | Nkeji | RFPM6033U | RFPM8033U | RFPM6038U | RFPM8038U |
| Oke nhazi |
|
|
|
|
|
| njem axis X/Y/Z | mm | 6200/3700/1000 | 8500/3700/1000 | 6200/4200/1000 | 8500/4200/1000 |
| A/C ntụgharị ntụgharị axis | ° | ±105/±360 | ±105/±360 | ±105/±360 | ±105/±360 |
| Gantry dị irè obosara | mm | 3300 | 3300 | 3800 | 3800 |
| Ebe dị anya site na imi spindle ruo worktable | mm | 200-1200 | 200-1200 | 200-1200 | 200-1200 |
| Tebụl arụ ọrụ |
|
|
|
|
|
| Akụkụ arụ ọrụ | mm | 2500×6000 | 2500×8000 | 3000×6000 | 3000×8000 |
| Ikike ibu ibu arụ ọrụ | t | 30 | 35 | 35 | 40 |
| Nkọwapụta T-oghere | mm | 28 | 28 | 28 | 28 |
| Nri ịkwọ ụgbọala |
|
|
|
|
|
| Oke. ọsọ nri X/Y/Z | m/min | 8/10/10 | 8/10/10 | 8/10/10 | 8/10/10 |
| Oke. ọsọ nri A/C | rpm | 60 | 60 | 60 | 60 |
| Ọsọ ọsọ ọsọ X/Y/Z | m/min | 12/15/15 | 10/15/15 | 12/15/15 | 10/15/15 |
| Ọsọ ọsọ ọsọ A/C | rpm | 100 | 100 | 100 | 100 |
| Spindle |
|
|
|
|
|
| Ụzọ ịkwọ ụgbọala |
| Igwe ọkụ eletrik | Igwe ọkụ eletrik | Igwe ọkụ eletrik | Igwe ọkụ eletrik |
| Oke. spindle ọsọ | rpm | 7000 | 7000 | 7000 | 7000 |
| Ike Spindle (S1/S6-40%) | Kw | 50/60 | 50/60 | 50/60 | 50/60 |
| Ọkpụkpụ Spindle (S1/S6-40%) | Nm | 318/382 | 318/382 | 318/382 | 318/382 |
| Spindle taper |
| HSK-A100 | HSK-A100 | HSK-A100 | HSK-A100 |
| Magazin ngwaọrụ (nhọrọ) |
|
|
|
|
|
| Ikike magazin ngwá ọrụ | T | 24 | 24 | 24 | 24 |
| Ụdị njide ngwaọrụ |
| HSK-A100 | HSK-A100 | HSK-A100 | HSK-A100 |
| Oke. dayameta ngwá ọrụ | mm | ф110/ф200 | ф110/ф200 | ф110/ф200 | ф110/ф200 |
| Oke. ogologo ngwá ọrụ | mm | 350 | 350 | 350 | 350 |
| Oke. arọ ngwá ọrụ | kg | 20 | 20 | 20 | 20 |
| izi ezi |
|
|
|
|
|
| Ndokwa ziri ezi X/Y/Z | mm | 0.028/0.018/0.014 | 0.032/0.018/0.014 | 0.028/0.024/0.014 | 0.032/0.024/0.014 |
| Nkwagharị X/Y/Z | mm | 0.018/0.012/0.010 | 0.020/0.012/0.010 | 0.018/0.016/0.010 | 0.020/0.016/0.010 |
| Ndị ọzọ |
|
|
|
|
|
| Ibu igwe | t | 84 | 100 | 94 | 115 |
| Akụkụ igwe (L× W × H) | cm | 1550×720×650 | 2050×720×650 | 1550×800×650 | 2050×800×650 |
