Ụdị Lathe dị larịị
Njirimara igwe
Usoro nke CNC lathes bụ ụdị n'ozuzu na ọkọlọtọ nke igwe na-edozi ígwè na-akpaghị aka, nke nwere ike ịrụ ọrụ njedebe na njedebe nke akụkụ ígwè ọrụ.Ọ nwere njirimara nke usoro a pụrụ ịdabere na ya, ọrụ dị mma, nke akụ na ụba na nke bara uru, wdg.Na-atụgharị elu, na-atụgharị eriri dị iche iche dị ka metric system, inch system module and warp section, wdg, nke bụ igwe igwe CNC a na-ejikarị eme ihe n'ọhịa nke igwe.
Nkọwapụta
| Nlereanya | CK6150 | CK6180 | CK61100 | CK61125 |
| Akwa | ||||
| Dayameta ịmafe kacha n'elu akwa | 500mm | 800mm | 1000mm | 1300mm |
| Ogologo workpiece kacha | 2000mm | 3000mm | ||
| Dayameta nfe kacha elu n'elu ụgbọ | 270mm | 480mm | 610 mm | 900mm |
| Obosara akwa | 400mm | 600mm | 755 mm | 1100mm |
| Spindle | ||||
| Dayameta nke spindle | 82mm | 104mm | 130mm | 100mm |
| Oke ọsọ spindle | 80-1500 rpm | 10-800 rpm | 4-300 rpm | 10-300 rpm |
| Isi moto ike | 7.5kW | 15kw | 22Kw | 30Kw |
| Njem | ||||
| Axis X | 270mm | 420mm | 520mm | 700mm |
| Z-axis | 1850 mm | 2750 mm | 2850 mm | 2850 mm |
| Nri | ||||
| X-axis ọsọ ọsọ ọsọ | 4m/min | |||
| Z-axis ọsọ ọsọ | 6m/min | |||
| Ọdụdọ ọdụ | ||||
| Dayameta aka uwe Tailstock | f75 | f120 | f160 | f220 |
| Tailstock aka uwe njem | 150 | 250 | 300 | |
| Tailstock taper | MT5 | MT6 | MT8 | |
| Akụkụ na ibu | ||||
| Akụkụ ( Ogologo × obosara × ịdị elu) | 3700x2700 × 3200mm | 5500x1950x1900mm | 6500x2100x2100mm | 6700x2550x2350mm |
| Ibu igwe | 3.4T | 6.1T | 11.5T | 22.6T |
Foto zuru ezu
